Hurrikain Marine Products

5790 Lawndale rd.
Saginaw, MI 48604
989-372-0340  Our NEW Phone number !    
We specialize in Chrysler Marine!
Home Chrysler Inboards Dana Stern Drives


Gelcoat Restoration Sunbrella and other fabric Return Policy About US View Cart
Before You buy elsewhere Ask if they OWN and work on Chrysler boats! We OWN 4 Personal Chrysler boats and know first hand what works and what doesn't. Some folks might say their your Marine  Parts Source but we truly own and work on them, so who's the real SOURCE? That's us in our Chrysler boat above! Click here for info on our boats and the Chrysler Marine Nationals we put on!


PV #66 Errors ?? Email US!

Some of the Most Commonly asked for Dana Parts.



Part Number




U Joint Dana 80 and 81           (1 U joint)

D5153X $36.50
End Yoke D-2-04-3161 $272.77
Anode Kit D-810071-X


No longer available

Lock washer, Output shaft cone Locknut D-830001 $42.00 remanufactured only 1 available  

Clamp Pivot housing boot Large D-830002 $18.00
Clamp Pivot housing boot Small D-83003 > supersedes to D-830407 $30.34
Washer D830049 $8.35



Gasket Upper/Lower

D-7-M-2 $28.00
Complete U joint Assembly D810611X Supersedes to D209404 $1045.15
Reman Yoke D282871R  



Currently Not available  use assembly above
Transom Seal D-830074 $85.00
Transom plate seal D-830090 $43.60
Gasket D-7-M4 $6.50
Gasket D-7-M-5 $8.00
Cover D-6M7 $21.85

Stainless Steel Steering Yoke Pivot Pin


D11M1 $130.00
Screw Long D830056 $4.21
Screw Short D830057 $9.95
Seal D-15-M-1 $49.32
Seal D-15-M-3    (supersedes to D810142x) $93.06

No Longer available

Oring D-15-M-4 $10.00
O Ring D-15-M5 $8.62
Oring D-15-M-9 $1.90
O ring D-15-M-10 $3.75
Bushing D-16-M-1 $16.39

 No Longer Available



Boot, Pivot Housing

This is for a unshielded drive..

Opening sizes: 4 3/4" and 8"

D-19-M-5 $115.00


Boot, Pivot Housing

This is for a shielded drive..

Opening sizes: 5" and 4 3/8"

D-19-M-9 $192.18

 No Longer available

Pinion Bearing Retainer 4 3/8"

D-26-M-2 $246.00

Bearing Pivot Housing D550674 $93.44

No Longer available

Drive Sleeve D810031x $189.00
Pin D-11-M3-1

(D-11-M-3 and it includes the clip )

Prop nut and Washer Aftermarket replacement MMD-830498 $31.07
Prop Spacer D830004-1 $35.00
Interlock Shift Arm and Shoe Sub Assembly 


  • The shaft on this arm is drilled for the newer 1/4 in. pin D11M271 that retains the D10M15 shift lever


D810036X $96.55
  • Input Pinion Shaft Clutch Collar

D23-M-1 $250.00
  • 1.60:1 Ratio

  • This is a shifting Model 80 upper gear set

  • This gear set contains a 4M4 26 tooth stem gear, a 17 tooth 810213X forward gear, and a 17 tooth 810214X reverse gear

  • The two drive gears in this set include new installed bushings

  • This is the most common gear set used in a Chrysler Dana combination

  • When replacing this gear set the D23M1 clutch collar should also be replaced

  • These gears are only serviced in this set and are not sold separately


D810211X $500.00
Dana Prop seal D15-M38   $55.67

No Longer available