Hurrikain Marine Products

5790 Lawndale rd.

Saginaw, MI 48604

989-372-0340  Our NEW Phone number ! 



We specialize in Chrysler Marine!
Home Chrysler Inboards Dana Stern Drives


Gelcoat Restoration Sunbrella and other fabric Return Policy About US View Cart
Before You buy elsewhere Ask if they OWN and work on Chrysler boats! We OWN 4 Personal Chrysler boats and know first hand what works and what doesn't. That's us in our Chrysler boat above! Click here for info on our boats and the Chrysler Marine Nationals we put on!


PV #66 Errors ?? Email US!
Fuel Filter

Fuel filter


NEW Chrysler Chokes

Click on the image to get a better look at the chokes. These are the early style that has a small rise in the housing. Some choke assemblies Chrysler used are completely flat and the rise will interfere with the carb. You can use the element in your present assembly, and you may need to shorted the rod to the correct length for your application. Only $25.00   

Flame Arrestors

*** There is a small amount of rise under the element of each arrestor make sure you allow for about a extra inch of clearance. ***

4 inch Throat

4142841 1.75 inches high

5.75 diameter

$73.50 email to check availability
5 Inch Throat
4142886 1.50 inches high

7 inch diameter


3745649 2  3/16  inches high

5.75 diameter


3745648 3 inches high

5.75 diameter


Carb Kits

Used w/ LM318, M340 & M360 Carter 4BBL


Used w/  M413 M426 & M440 Carter 4BBL


Used w/ LM318 & M360 Rochester 4BBL

Carb Stud Kits
Kit for use without Carb Wedge  consist of 4 Short Studs       $26.00
Kit for use with Carb Wedge  consist of 2 Short Studs and 2 Long Studs      $26.00
Carb wedges

8 Deg. Wedge - Used with Carter 4 BBL


Base Gasket - Used with Carter Carburetor

With Rochester Carb use below

7 Deg. Wedge - Used with Rochester 4 BBL




Base Gasket - Used with Rochester Carburetor